Author Topic: Hour and Day History incorrect  (Read 2299 times)


  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
Hour and Day History incorrect
« on: February 09, 2013, 04:06:04 PM »
I've seen similar posts on this topic for older firmware, but they were over 120 days old, so thought I'd start a new one.
Gateway: 1.0.499

We've had a cold snap over the last 2 days, and I was interested to see what my daily and hourly values looked like compared to the week prior.

Live View shows that i've been running 4 to 8 kWh, which is likely accurate (electric heat).

History and graphs show accuracy to a certain point, then register 0.1 kWh usage.
How to fix? and how does it get into this state?



  • Sr. Member
  • ****
  • Posts: 356
  • Karma: +0/-0
Re: Hour and Day History incorrect
« Reply #1 on: February 12, 2013, 09:36:43 PM »
Looks to me like the Gateway has lost communication with the MTU.  It might be something that was plugged in at the time it started and putting noise and/or "eating" the powerline signals.

I'd looks at the statistics page.  Watch for regular updates.  I'll bet you aren't getting any.