« previous next »
Pages: [1]

Author Topic: Hardware trouble from the get-go  (Read 4343 times)

eaglemanbsa

  • Newbie
  • *
  • Posts: 2
  • Karma: +0/-0
Hardware trouble from the get-go
« on: April 26, 2014, 05:53:53 AM »
I have a 200 amp breaker, and the CTs that came with my ted pro home are nowhere near big enough to go around the incoming hot lines. I measured 0.720" with calipers as the OD of the lines, and the ID of the CTs appears to be roughly 0.65". What now? Did I just purchase a $300 paperweight?  >:(
Logged

pfletch101

  • Sr. Member
  • ****
  • Posts: 427
  • Karma: +0/-0
    • My home page
Re: Hardware trouble from the get-go
« Reply #1 on: April 26, 2014, 07:06:21 AM »
I believe that there is an alternate current sensor setup that will wrap around conductors of arbitrary size. Give the TED support folks a call on Monday.
Logged
Peter R. Fletcher
TED Pro Home - main MTUs monitoring utility and PV Solar feeds; 2 Spyders monitoring selected individual circuits

eaglemanbsa

  • Newbie
  • *
  • Posts: 2
  • Karma: +0/-0
Re: Hardware trouble from the get-go
« Reply #2 on: April 26, 2014, 02:08:58 PM »
Got a reply from tech support on the ticket, they evidently have larger CTs that will work, will just cost an extra $13 and some time to ship stuff back and forth.
Logged
Pages: [1]
« previous next »