Author Topic: Monthly History Export of Data is Corrupted.  (Read 3007 times)

alaskaemwave

  • Newbie
  • *
  • Posts: 5
  • Karma: +0/-0
Monthly History Export of Data is Corrupted.
« on: July 21, 2011, 12:15:36 PM »
Gateway Version 1.0.406
Daughterboard Version 1.0.48
Footprints Version 1.0.223
MTU Version 1.0.57

Below is a snippet of the export of monthly data into a spreadsheet of a CSV for MTU1.  I have three MTUs.  MTU2 and 3 are OK.  All three give good current readings.  But as you can see all lines of MTU1 seem to be near duplicates.    What gives?
mtu   date   power   cost   min pwr   min pwr date   peak pwr   peak pwr date    "min cost"   min cost date   peak cost   peak cost date    "min voltage"   min voltage date   peak voltage   peak voltage date
0   01/01/2011 00:00:00   1633.092   392.14   2.614   07:03   13.112   03:20   0.33   01:28   1.59   03:20   86.5   02:26   127.1   07:17
0   01/01/2011 00:00:00   1633.077   392.14   2.614   07:03   13.112   03:20   0.33   01:28   1.59   03:20   86.5   02:26   127.1   07:17
0   01/01/2011 00:00:00   1633.058   392.14   2.614   07:03   13.112   03:20   0.33   01:28   1.59   03:20   86.5   02:26   127.1   07:17
0   01/01/2011 00:00:00   1633.043   392.15   2.614   07:03   13.112   03:20   0.33   01:28   1.59   03:20   86.5   02:26   127.1   07:17
0   01/01/2011 00:00:00   1633.025   392.15   2.614   07:03   13.112   03:20   0.33   01:28   1.59   03:20   86.5   02:26   127.1   07:17
0   01/01/2011 00:00:00   1633.01   392.15   2.614   07:03   13.112   03:20   0.33   01:28   1.59   03:20   86.5   02:26   127.1   07:17
0   01/01/2011 00:00:00   1632.993   392.15   2.614   07:03   13.112   03:20   0.33   01:28   1.59   03:20   86.5   02:26   127.1   07:17
0   01/01/2011 00:00:00   1632.977   392.15   2.614   07:03   13.112   03:20   0.33   01:28   1.59   03:20   86.5   02:26   127.1   07:17
0   01/01/2011 00:00:00   1632.96   392.16   2.614   07:03   13.112   03:20   0.33   01:28   1.59   03:20   86.5   02:26   127.1   07:17
0   01/01/2011 00:00:00   1632.943   392.16   2.614   07:03   13.112   03:20   0.33   01:28   1.59   03:20   86.5   02:26   127.1   07:17
0   01/01/2011 00:00:00   1632.926   392.16   2.614   07:03   13.112   03:20   0.33   01:28   1.59   03:20   86.5   02:26   127.1   07:17

TEDSupport6

  • Sr. Member
  • ****
  • Posts: 291
  • Karma: +0/-0
Re: Monthly History Export of Data is Corrupted.
« Reply #1 on: July 22, 2011, 01:01:17 AM »
Is the time correct in your Footprints software? If the date isn't correct the history will not record properly. If it is correct and you're still having the issue, then you may need to reset your totals to zero.

alaskaemwave

  • Newbie
  • *
  • Posts: 5
  • Karma: +0/-0
Re: Monthly History Export of Data is Corrupted.
« Reply #2 on: July 27, 2011, 01:40:55 PM »
yah.. ntp time was on the button.   OK.. we can reset totals later. 


alaskaemwave

  • Newbie
  • *
  • Posts: 5
  • Karma: +0/-0
Re: Monthly History Export of Data is Corrupted.
« Reply #3 on: August 12, 2011, 04:17:21 AM »
Hi Tedsupport6... Just tried it....Reset totals did not work.   If you would like access to the TED, let me know by private contact... well... lets see.  How about email to temp@kyes.com?  I will respond with an IP and port number after I set up port forwarding on the border router.  You should not need the password to download stuff right?  If you do, I can send that to you by email as well.