The Energy Detective Forums

General Category => TED 1.0 Pro Support => Topic started by: Cassiel on February 09, 2016, 02:53:50 PM

Title: Spyder anomalous readings
Post by: Cassiel on February 09, 2016, 02:53:50 PM
On my last two CT's, I received a strange reading at exactly noon on a particular day (the 4th)

Code: [Select]
CT 19 2/4/2016 13:00 0 0
CT 19 2/4/2016 12:00 0 -228.33
CT 19 2/4/2016 11:00 0 0
Code: [Select]
CT 20 2/4/2016 13:00 0 0
CT 20 2/4/2016 12:00 0 -228.32
CT 20 2/4/2016 11:00 0 0

Here is what is displayed in the interface...

(http://i.imgur.com/qpFaj6o.jpg)

Here's what the Spyder tab shows in $ view

(http://i.imgur.com/sd5PtI7.jpg)

and the kWh view:

(http://imgur.com/X1ljnoH.jpg)

When I had empty ports enabled in the configuration I saw similar numbers in the interface, so perhaps the signal was lost briefly on these two?

For the 8th, the readings look like this:

Code: [Select]
CT 19 2/8/2016 23:00 0 0
CT 19 2/8/2016 22:00 0 0
CT 19 2/8/2016 21:00 0 0
CT 19 2/8/2016 20:00 0 0
CT 19 2/8/2016 19:00 0 0
CT 19 2/8/2016 18:00 0 0
CT 19 2/8/2016 17:00 0 0
CT 19 2/8/2016 16:00 0 0
CT 19 2/8/2016 15:00 0 0
CT 19 2/8/2016 14:00 0 0
CT 19 2/8/2016 13:00 0 0
CT 19 2/8/2016 12:00 0 0
CT 19 2/8/2016 11:00 0 0
CT 19 2/8/2016 10:00 0 0
CT 19 2/8/2016 9:00 0 0
CT 19 2/8/2016 8:00 0 0
CT 19 2/8/2016 8:00 0 0
CT 19 2/8/2016 7:00 0 0
CT 19 2/8/2016 6:00 0 0
CT 19 2/8/2016 5:00 0 0
CT 19 2/8/2016 4:00 0 0
CT 19 2/8/2016 3:00 0 0
CT 19 2/8/2016 2:00 0 0
CT 19 2/8/2016 1:00 0 0
CT 19 2/8/2016 0:00 0 0
Code: [Select]
CT 20 2/8/2016 18:00 0.014 0
CT 20 2/8/2016 17:00 0.003 0
CT 20 2/8/2016 16:00 0 0
CT 20 2/8/2016 15:00 0 0
CT 20 2/8/2016 14:00 0 0
CT 20 2/8/2016 13:00 0 0
CT 20 2/8/2016 12:00 0 0
CT 20 2/8/2016 11:00 0 0
CT 20 2/8/2016 10:00 0 0
CT 20 2/8/2016 9:00 0 0
CT 20 2/8/2016 8:00 0 0
CT 20 2/8/2016 8:00 0 0
CT 20 2/8/2016 7:00 0 0
CT 20 2/8/2016 6:00 0 0
CT 20 2/8/2016 5:00 0 0
CT 20 2/8/2016 4:00 0 0
CT 20 2/8/2016 3:00 0 0
CT 20 2/8/2016 2:00 0 0
CT 20 2/8/2016 1:00 0 0
CT 20 2/8/2016 0:00 0 0

Is there a changelist for the firmware versions.